5451 Helmholtz Coil, 300mm

The Model 5451 Helmholtz Coil Electromagnet is a single axis coil pair arranged in Helmholtz geometry to give a relatively large volume of high uniformity magnetic field. The 5451 Helmholtz Coil Electromagnet has an aperture diameter of 300 mm (11.8 inch) with an operating range to 54 mTrms (540 Grms). The Helmholtz Coil Electromagnet can be mounted in any orientation and with a mass of 100 kg (220 lbs) the 5451 can be integrated into experimental or test equipment. Since the Helmholtz Coil configuration is not magnetically shielded, magnetic and electrical conducting materials should be kept at least 1 m from the Electromagnet center to avoid excess distortion of the magnetic field within the working volume.

 

Features

  • Mass = 100kg
  • 340 x 480 x 415mm
  • 50mT field over 300mm diameter
  • 0.77mT/A

Applications

  • Low field NMR & EPR Spectrometry
  • Materials measurement
  • Sensor testing, development and calibration
  • Electronic sensitivity
  • Biological affects

Accessories

Power Supplies

We offer several different power supplies for the 5451 electromagnet; the Sorensen switch mode, and the Danfysik high stability linear.

We offer Sorensen unipolar supplies which are suitable for applications were a DC field is required. They feature a stability of 0.05% over 8 hours and they are available with an optional IEEE-488 interface. Order part numbers:
DLM40-75E - Power supply, 40V, 75A, unipolar, without IEEE-488 interface
DLM40-75EM9E - Power supply, 40V, 75A, unipolar, with IEEE-488 interface
DLM40-100E - Power supply, 40V, 100A, unipolar, without IEEE-488 interface
DLM40-100EM9E - Power supply, 40V, 100A, unipolar, with IEEE-488 interface


For applications that require a bipolar power supply, we offer the Kepco BOP series. They feature stability of 0.02% over 8 hours, and an optional IEEE-488 interface may be installed either by GMW, or by the user at a later date. With two of the Kepco BOP 20V, 20A, supplies wired in parallel to acheive 20V, 40A will be sufficient for a 5451 Modest Power Bipolar System or for intermittent operation with air cooling. The two BOP20-20D wired in parallel will not achieve maximum power of the 545.

BOP20-20DL Power supply, 20V, 20A, bipolar.

Magnet Current Cables

We take the trouble out of connecting your magnet to the power supply with a wide variety of pre-terminated cable assemblies.

Power Supply direct to Magnet:
16907-0058-0 - Cable, Current & Interlock, DLM40-75E/DLM40-100E to 5451, 70A, 5m.
16907-0058-2 - Cable, Current & Interlock, 2x BOP 20-20V to 5451, 20A, 5m.
16907-0058-1 - Cable, Current & Interlock, 858 70A/30V to 5451, 70A, 5m
Power Supply to Current Reversal Switch
16907-0062-0 - Cable, Current & Interlock, DLM50-75E to 5971-160, 5m

Current Reversal Switch to Magnet:
16907-0058-4 - Cable, Current & Interlock, 5971-160 to 5451, 5m

Software and PC Interface Cards

LVPTMPS - Driver for SGA power supplies with IEEE-488 interface.
LVKCMPS - Driver for Kepco power supplies with IEEE-488 interface.
LVMCTRL - Driver for complete closed-loop control of magnet system, power supply, and teslameter (gaussmeter) drivers.

* Note: The above listed drivers require LabVIEW 8.21 or newer version.

776670-09 - National Instruments LabVIEW Full System for Windows with 1 Yr Service (English).
778032-01 - National Instruments IEEE-488 PC interface card, PCI bus.
BIT-4886 - IEEE-488 Interface Card for BOP Power Supply, 16 bit.

Pricing

Part No. Description Qty Price

Model 5451 300mm Electromagnet

5451

Uniform Field Electromagnet

$17,970.00
Description

Uniform Field Electromagnet

Qty

Power Supplies and Current Cable Assemblies

BPS-40-100

Power Supply, true bipolar, 40V, 100A, Output noise, <5mArms, analog voltage programmable.

$19,900.00
Description

Power Supply, true bipolar, 40V, 100A, Output noise, <5mArms, analog voltage programmable.

Qty
BPS-85-70-EC

Power Supply, true bipolar, 85V, 70A, Output noise, <5mArms, analog voltage programmable, includes Energy Control option for inductive loads.

$26,510.00
Description

Power Supply, true bipolar, 85V, 70A, Output noise, <5mArms, analog voltage programmable, includes Energy Control option for inductive loads.

Qty
DLM40-75ER

Power Supply, 40V, 75A, unipolar, 0.05% / 8hrs, analog programming. Input voltage: 180 – 264V, 50/60Hz, 16A, 1P.

$7,290.00
Description

Power Supply, 40V, 75A, unipolar, 0.05% / 8hrs, analog programming. Input voltage: 180 – 264V, 50/60Hz, 16A, 1P.

Qty
DLM40-75EM9ER

Power Supply, 40V, 75A, unipolar, 0.05% / 8hrs, IEEE-488. Input voltage: 180 – 264V, 50/60Hz, 16A, 1P.

$8,760.00
Description

Power Supply, 40V, 75A, unipolar, 0.05% / 8hrs, IEEE-488. Input voltage: 180 – 264V, 50/60Hz, 16A, 1P.

Qty
16907-0058-0

Cable, Current & Interlock, DLM40-75ER or DLM40-100E to 5451, 70A, 5m.

$650.00
Description

Cable, Current & Interlock, DLM40-75ER or DLM40-100E to 5451, 70A, 5m.

Qty
16907-0058-2

Cable, Current & Interlock, 2x BOP 20-20M to 5451, 60A, 5m.

$650.00
Description

Cable, Current & Interlock, 2x BOP 20-20M to 5451, 60A, 5m.

Qty
BOP20-20DL x 2

Consists of: 2x BOP20-20DL Power Supplies wired in parallel, 20V, 40A, bipolar, Input voltage: 115Vac, single phase.

$16,600.00
Description

Consists of: 2x BOP20-20DL Power Supplies wired in parallel, 20V, 40A, bipolar, Input voltage: 115Vac, single phase.

Qty
16907-0058-5

Cable, Signal & Power, BPS to 5451, 5m

$650.00
Description

Cable, Signal & Power, BPS to 5451, 5m

Qty
16907-0058-4

Cable, Current & Interlock, 5971-160 to 5451, 5m

$650.00
Description

Cable, Current & Interlock, 5971-160 to 5451, 5m

Qty
DLM40-100ER

Power Supply, 40V, 100A, unipolar, 0.05% / 8hrs. Input voltage: 180 – 264Vac, three phase.

$8,390.00
Description

Power Supply, 40V, 100A, unipolar, 0.05% / 8hrs. Input voltage: 180 – 264Vac, three phase.

Qty
DLM40-100EM9ER

Power Supply, 40V, 100A, unipolar, 0.05% / 8hrs, IEEE-488 interface. Input voltage: 180-264Vac, three phase.

$9,870.00
Description

Power Supply, 40V, 100A, unipolar, 0.05% / 8hrs, IEEE-488 interface. Input voltage: 180-264Vac, three phase.

Qty
16907-0062-0

Cable, Current & Interlock, DLM power supply to 5971-160, 5m

$650.00
Description

Cable, Current & Interlock, DLM power supply to 5971-160, 5m

Qty

Accessories

5972

19″ 3U Rack Mount Cabinet with USB Interface NI DAQ, Power Supply for Field Transducer, Electromagnet Interlock Status, connectors on rear panel for USB connector, field transducer & interlocks.

$5,900.00
Description

19″ 3U Rack Mount Cabinet with USB Interface NI DAQ, Power Supply for Field Transducer, Electromagnet Interlock Status, connectors on rear panel for USB connector, field transducer & interlocks.

Qty
TF50 B A 208/50 T1 FCR DCOMACOM

Recirculating Water Chiller, 5kW, 208Vac, 50Hz, 13.3 l/min @ 4.1 bar.

$17,870.00
Description

Recirculating Water Chiller, 5kW, 208Vac, 50Hz, 13.3 l/min @ 4.1 bar.

Qty
TF50 B A 208/60 T1 FCR DCOMACOM

Recirculating Water Chiller, 5kW, 208Vac, 60Hz, 13.3 l/min @ 4.1 bar.

$17,870.00
Description

Recirculating Water Chiller, 5kW, 208Vac, 60Hz, 13.3 l/min @ 4.1 bar.

Qty

Drivers, Software, and Computer Interface Cards

Note: LabVIEW drivers require LabVIEW for Windows.

AIOPC

All-In-One Computer. Intel Core i7 CPU, Windows 10 Professional 64-bit English, 8GB RAM, 256GB HDD, Non-touch 27″ inch LCD display. Wireless keyboard
and mouse.

$2,500.00
Description

All-In-One Computer. Intel Core i7 CPU, Windows 10 Professional 64-bit English, 8GB RAM, 256GB HDD, Non-touch 27″ inch LCD display. Wireless keyboard
and mouse.

Qty
LVPTMPS

LabVIEW Driver for SGA power supplies with IEEE-488 interface.

No Charge
Description

LabVIEW Driver for SGA power supplies with IEEE-488 interface.

Qty
LVKCMPS

LabVIEW Driver for BOP power supplies with IEEE-488 interface.

No Charge
Description

LabVIEW Driver for BOP power supplies with IEEE-488 interface.

Qty
LVMCTRL

LabVIEW Magnet Control software. Requires LabVIEW 2010 or later.

$1,180.00
Description

LabVIEW Magnet Control software. Requires LabVIEW 2010 or later.

Qty
BIT-4886

GPIB-IEEE interface card for Kepco BOP Power Supplies, 16 bit current set resolution, and full Power Supply control.

$1,990.00
Description

GPIB-IEEE interface card for Kepco BOP Power Supplies, 16 bit current set resolution, and full Power Supply control.

Qty

Systems & Pricing

5451 Electromagnet Systems

GMW is pleased to offer the following two preconfigured magnet systems.

Unipolar Field SystemWith applications to materials measurement, sensor development, electronic sensitivity and biological effects.

Unipolar Field System with Field ReversalWith applications to materials measurement, sensor development, electronic sensitivity and biological effects.

Terms and Conditions

Exclusive Distributors:

India: Magnergy Technology
Web: www.magnergytech.com
Email: info@magnergytech.com

Japan: TOYO Corporation
Web: www.toyo.co.jp/English/
Email: magne@toyo.co.jp

Spain and Portugal: Helium 3
Web: www.helium3.es
Email: Carlos Montero, c.montero@helium3.es

Terms and Conditions:

Prices above are for domestic deliveries to USA, Canada, and Mexico only.
Prices to other Countries are approximately 1.1x USA List Price.
Prices are expressed in U.S. Dollars, FCA  Origin San Carlos, California 94070.
Prices are subject to change without notice.
OEM discounts are available.

Payment Terms:

Visa, MasterCard, Amex, Prepayment before shipment, or Net 30 days (subject to credit acceptance).
Orders may be submitted to sales@gmw.com

Delivery:

Stock to 120 days.