Danisense High Current Transducers

The DaniSense DR Series Current Transducers are based on a flux-gate zero flux detector with closed-loop operation to provide a signal output current accurately defined by the number of turns in the compensation winding. They provide higher accuracy for Power Analyzer measurements and improved performance for power amplifiers.

DR Series High Current Transducers have Full-scale current ranges to 5000 Arms/±8000A peak to 7000 Arms/±10000A, depending on model.

Features

  • Very high absolute amplitude and phase accuracy from dc to over 1kHz
  • Low signal output noise
  • Low fluxgate switching noise on the pimary
  • Enhanced electrostatic shielding to increase rejection of primary dV/dt coupling
  • Increased operating temperature range
  • Full-scale current range to 5000 Arms/±8000A peak with DS5000 head and electronics. DR10000 Models to 10kA
  • Amplitude and Phase measurement to 300kHz included with each head

Tech Support

  1. Product Selection Guide
  2. DR5000IM
  3. DR5000UX-10V/5000A
  4. DR5000UX-10V/7500A
  5. DR10000IM
  6. DR10000UX-10V
  7. Vishay S102 Precision Metal Foil Resistor
  8. GMW-CT-BR-X.XX Burden Resistor Module
  9. Condor Linear DC Power Supply HAA15-0.8-A+ and HAA15-1.5-A+
  1. DaniSense Product Manual
  2. Principles of Zero Flux Current Transducers
  3. Flux-Gate
  4. Tech Note: “Wrap Around” or Distributed Primary Current Cable
  5. Accurate Power Conversion Measurements on High Power Motor Drives
  6. VAC Nanocrystalline Vitroperm Core EMC Products
  7. Product Name Guide
  8. Product Naming Letter
  9. How to Choose Danisense Current Transducers and System Interface Units
  10. Application Note: Replacing Shunts with Danisense Current Transducers for Calibration Systems
  11. Application Note: DCCT with Calibration Windings
  12. Application Note: Estimating Current Measurement Uncertainty when Utilizing Current Transducers
  13. Application Note: Low-Current AC Measurement with Danisense DCCTs
  14. Application Note: A Guide to Error Analysis in Danisense DCCT Systems and Considerations for Output Selection  Ask us for Mathematica Source Code
  15. The Physics of Current Measurement – presented by Filippos Toufexis, PhD
  16. Current Measurement for Electric Vehicle Charger Test – presentation by Ben Hartzell

 

  1. Outstanding DC Gain Accuracy and Stability Demonstrated in a 100A Measuring System
    Clarke-Hess Communication Research Corp.
  2. Precision Current Monitor System for the Power Supplies at SRRC
    Yuan-Chen Chien et al, SRRC, Taiwan, Particle Accelerator Conference, 2001.
  3. Large Scale Use of Solid State AC Power Sources for Automated Transformer Testing
    Michael Orr, Pacific Power Source, Inc.; Alvin Kopp, High Voltage Test Engineering.
  4. Solid-State AC Power Sources for Transformer Testing
    Alvin Kopp, Michael Orr, Pacifica Power Source, Inc.
  1. 3D Models, STEP files, Box.com link

Accessories

GMW-CT-BR-X.XX

The GMW-CT-BR-X.XX Burden Resistor Module generates a Voltage Monitor Signal when the current output from a closed-loop current transducer is connected to the current input terminals of a Power Analyzer or DaniSense Interface unit.

Additional Data:
Datasheet: GMW-CT-BR-X.XX Burden Resistor Module

Pricing

DaniSense Current Transducer Heads, DSSIU, Cables and Accessories are compatible with LEM IT Ultrastab Current Transducers.

DR5000 Current Transducers

Part No.DescriptionPriceIn Stock
DR5000IM

Current Transducer, 5kArms/±8kA DC, 1:2500 Turns Ratio, 2000mArms/±3200mA Signal, includes Separate Electronics Box, Banana Plugs Output

 $10,720.00
You save (%)
8 weeks. Quote
DR5000UX-10V/5000A

Current Transducer, 1 channel, 3.6kArms/±5kA DC, 7.2Vrms/±10V Signal (2mV/A), 150mm aperture, 5m Head Connecting Cable, 5m Signal Cable

 $12,150.00
You save (%)
8 weeks. Quote
DR5000UX-10V/7500A

Current Transducer, 5kArms/±7.5kA DC, 6.66Vrms/±10V Signal (1.33mV/A), ), 150mm aperture, 5m Head Connecting Cable, 5m Signal Cable

 $12,430.00
You save (%)
8 weeks. Quote

DR10000 Current Transducers

Part No.DescriptionPriceIn Stock
DR10000IM

Current Transducer, 7kArms/±10kA DC, 1:2500 Turns Ratio, 2800mArms/±4000mA Signal, includes Separate Electronics Box, Banana Plugs Output

 $13,580.00
You save (%)
8 weeks. Quote
DR10000UX-10V

Current Transducer, 7kArms/±10kA DC, 7Vrms/±10V Signal (1mV/A), includes Separate Electronics Box, Banana Plugs Output

 $16,430.00
You save (%)
8 weeks. Quote

DR Power and Signal Output Cables

Part No.DescriptionPriceIn Stock
1416100001

Cable, Transducer Head to Electronics Box for DR Transducer System, 10m

 $1,470.00
You save (%)
4 weeks. Quote
1416100002

Cable, Transducer Head to Electronics Box for DR Transducer System, 20m

 $1,730.00
You save (%)
4 weeks. Quote
1416100003

Cable, Transducer Head to Electronics Box for DR Transducer System, 30m

 $1,980.00
You save (%)
4 weeks. Quote
1416100007

Cable, Transducer Head to Electronics Box for DR Transducer System, 25m

 $1,860.00
You save (%)
4 weeks. Quote

Accessories

Part No.DescriptionPriceIn Stock
S102CT-5R00

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 5Ω, recommended power <0.3W

 $25.00
You save (%)
S102CT-10R0

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 10Ω, recommended power <0.3W

 $25.00
You save (%)
S102CT-20R0

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 20Ω, recommended power <0.3W

 $25.00
You save (%)
S102CT-50R0

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 50Ω, recommended power <0.3W

 $25.00
You save (%)
S102CT-100R

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 100Ω, recommended power <0.3W

 $25.00
You save (%)
S102CT-200R

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 200Ω, recommended power <0.3W

 $25.00
You save (%)
HAA15-0.8-A+G

Power Supply, Open Frame, Linear, Dual, ±15V, 0.8A

 $220.00
You save (%)
HBB15-1.5-A+G

Power Supply, Open Frame, Linear, Dual, ±15V, 1.5A

 $260.00
You save (%)
HCC15-3-A+G

Power Supply, Open Frame, Linear, Dual, ±15V, 3.0A

 $320.00
You save (%)
16928-0000-0

Adapter Plug, Danfysik / LEM to DaniSense

 $200.00
You save (%)
2 weeks. Quote
GMW-CT-BR-0.83

Burden Resistor Module, .83 ohms, +/- .05%, 1500mA

 $250.00
You save (%)
2 weeks. Quote
GMW-CT-BR-1.0

Burden Resistor Module, 1.0 ohms, +/- .05%, 1200mA

 $250.00
You save (%)
2 weeks. Quote
GMW-CT-BR-1.67

Burden Resistor Module, 1.67 ohms, +/- .05%, 600mA

 $250.00
You save (%)
2 weeks. Quote
GMW-CT-BR-10.0

Burden Resistor Module, 10.0 ohms, +/- .05%, 100mA

 $250.00
You save (%)
2 weeks. Quote
GMW-CT-BR-2.5

Burden Resistor Module, 2.5 ohms, +/- .05%, 400mA

 $250.00
You save (%)
2 weeks. Quote
GMW-CT-BR-5.0

Burden Resistor Module, 5.0 ohms, +/- .05%, 250mA

 $250.00
You save (%)
2 weeks. Quote
V110

Soft Magnetic Core, Toroidal, VITROPERM, 500F 63mm x 50mm x 25mm

 $80.00
You save (%)
Backordered:
2 weeks

DC Calibration

Note: Calibration on new product is discounted 50%.

Part No.DescriptionPriceIn Stock
CL-17025-1000A-DC

17025 Accredited Calibration, Current Transducer, Full-scale Range between 0 and 1000Adc, https://gmw.com/quality/

 $500.00
You save (%)
CL-17025-1000A-DC-ADD

Calibration of Additional Transducer

 $250.00
You save (%)
CL-17025-3000A-DC

17025 Accredited Calibration, Current Transducer, Full-scale Range between 1001 and 3000Adc, https://gmw.com/quality/

 $800.00
You save (%)
CL-17025-3000A-DC-ADD

Calibration of Additional Transducer

 $400.00
You save (%)
CL-17025-11000A-DC

17025 Accredited Calibration, Current Transducer, Full-scale Range between 3001 and 11000Adc, https://gmw.com/quality/

 $1,500.00
You save (%)
CL-17025-11000A-DC-ADD

Calibration of Additional Transducer

 $750.00
You save (%)

AC Calibration

Note: Calibration on new product is discounted 50%.

Part No.DescriptionPriceIn Stock
CL-17025-1000A-AC

17025 Accredited Calibration, Current Transducer, Full-scale Range between 0 and 1000Arms, 50-400Hz, https://gmw.com/quality/

 $500.00
You save (%)
CL-17025-1000A-AC-ADD

Calibration of Additional Transducer

 $250.00
You save (%)
CL-17025-3000A-AC

17025 Accredited Calibration, Current Transducer, Full-scale Range between 1001 and 3000Arms, 50-400Hz, https://gmw.com/quality/
        400Hz is limited to 2000Arms

 $800.00
You save (%)
CL-17025-3000A-AC-ADD

Calibration of Additional Transducer

 $400.00
You save (%)
CL-17025-8000A-AC

17025 Accredited Calibration, Current Transducer, Full-scale Range between 3001 and 8000Arms, 50-400Hz, https://gmw.com/quality/
        400Hz is limited to 2000Arms

 $1,500.00
You save (%)
CL-17025-8000A-AC-ADD

Calibration of Additional Transducer

 $750.00
You save (%)

Calibration and Repair

GMW provides application and engineering and calibration support for DaniSense Current Transducers.

For Calibration and Service of DaniSense Current Transducers see Calibration & Service

Quantity Discount Schedule:
Quantity 1 – 9 10 – 24
Discount 0% 5%

For multi-channel Current Transducer Systems, see Systems Pricing.

Terms and Conditions

Terms and Conditions:

Prices not inclusive of US tariffs on products manufactured in other countries. Tariffs rates effective at time of shipment will be added.

Prices above are for domestic deliveries to Canada, USA and Mexico only.
Prices are expressed in U.S. Dollars, FCA San Carlos, California.
Prices are subject to change without notice.

Payment:

Visa, MasterCard, Amex, or Net 30 days (subject to credit acceptance).

Delivery:

From Stock to 60 Days