DaniSense DC/AC High Accuracy Current Transducers

The DaniSense DS Series Current Transducers are based on a flux-gate zero flux detector with closed-loop operation to provide a signal output current accurately defined by the number of turns in the compensation winding. They provide higher accuracy for Power Analyzer measurements and improved performance for power amplifiers.

Features

  • Very high absolute amplitude and phase accuracy from dc to over 1kHz
  • Low signal output noise
  • Low fluxgate switching noise on the pimary
  • Enhanced electrostatic shielding to increase rejection of primary dV/dt coupling
  • Increased operating temperature range
  • Reduced mechanical dimensions
  • Full-scale current ranges to 2000Arms/±3000A peak in a self-contained head
  • Full-scale current range to 5000 Arms/±8000A peak with DS5000 head and electronics.
  • Options: Voltage Output Signal; Calibration Winding
  • Amplitude and Phase measurement to 300kHz included with each head

DaniSense Current Transducer Heads, DSSIU, Cables and Accessories are compatible with LEM IT Ultrastab Current Transducers.

Tech Support

  1. Minimizing Field Inaccuracy in MRI Electomagnet Control Systems, N. I.
    Matter, S. Conolly, G. Scott, Electrical Engineering, Stanford University, Stanford, CA. ISMRM, 2004.
  2. Large Scale Use of Solid State AC Power Sources for Automated Transformer Testing
    Michael Orr, Pacific Power Source, Inc.; Alvin Kopp, High Voltage Test Engineering.

Accessories

DaniSense Current Transducer (DCCT) Heads, DSSIU, Cables and Accessories are compatible with LEM IT Ultrastab Current Transducers.

DSSIU-6 Transducer Interface Unit and Power Supply, 6-channel

Fully configurable dedicated 6-channel system interface unit for Danisense DS series current transducers. Powers up to 6 x DS50 to DS2000 at the same time. Heads may be mixed (e.g. two DS2000IDLA and three DS200IDSA). Uses DB9 to DB9 cable for connection to transducer head (see cables below) and provides banana jack outputs for signal output.

Supports calibration windings and has 6 slots for optional voltage output modules VOM (1V or 10V), specified upon ordering.

Includes AC mains power cable. Other cables not included.

Additional Data:
Datasheet: DSSIU-6-1U Datasheet rev. 10/20/2016

DSSIU-4-1U Transducer Interface Unit and Power Supply, 4-channel

Provides Power and Signal connection for up to four Current Transducer heads. Heads may be mixed (e.g.: One DS2000ILLA and Three DS200ISSA Heads). DB9 connection to Transducer head and Banana Plug Jacks for Signal Output.
Includes AC Mains power cable. Other cables not included.
For Transducer Head to DSSIU-4-1U cable, see:
1411100001, 1411100002, 1411100003 ,1411100004 (descriptions below).

Additional Data:
Datasheet: DSSIU-4-1U Datasheet

Cables for Signal and Power, Calibration Winding Option

Signal, Power and Calibration Winding Cables
Part Number Length Termination A,
Transducer Head
Termination B Cable Purpose
1411100001 2m DB9M DB9F Signal, Power and Calibration Winding Cable.
For use with DSSIU-4-1U or DSSIU-6-1U.
SP10005 5m DB9M DB9F Signal and Power Cable.
For use with DSSIU-4 or DSSIU-6.
1411100002 5m DB9M DB9F Signal, Power and Calibration Winding Cable.
For use with DSSIU-4-1U or DSSIU-6-1U.
1411100003 10m DB9M DB9F Signal, Power and Calibration Winding Cable.
For use with DSSIU-4-1U or DSSIU-6-1U.
1411100005 15m DB9M DB9F Signal and Power Cable.
For use with DSSIU-4 or DSSIU-6.1
1411100004 20m DB9M DB9F Signal, Power and Calibration Winding Cable.
For use with DSSIU-4 or DSSIU-6.1
1417100003 2m DSSIU-6-1U-V:
XLRm
Banana Plugs Voltage Signal Cable.

For use with DSSIU-6-1U-V.

SP10381 2m DB9M Unterminated Signal and Power Cable.1
1416100001 10m DB9M DB9F Signal and Power Cable.
For use with DR5000 / DR10000 Transducer Systems
1416100002 20m DB9M DB9F Signal and Power Cable.
For use with DR5000 / DR10000 Transducer Systems

16900451

Primary Current Cable for DC or AC measurements to 500A rms. These cables are constructed using three flexible cables terminated in a lug.

These cables allow 'splitting' of the return current around the transducer, reducing the radiating loop area and improving frequency response.

Additional Data:
Drawing: 16900451 Revision B - PDF - 78kB

DS-BR

Burden Resistor Modules generate a Voltage Output Signal from the secondary current output of a current transducer.

IST-BR

Burden Resistor Modules generate a Voltage Monitor Signal when the current output from a closed-loop current transducer is connected to the current input terminals of a Power Analyzer.

Additional Data:
Datasheet: IST-BR Burden Resistor Module

866-BB

Busbars

Busbars are for DC measurements to 600A. Busbar is a solid bar with locating o-rings. Current cables are connected to each end.

IT 600-BB - Busbar for 600A transducer head

Forced air cooling may be required to maintain the Busbar temperature < 40°C for continuous operation at 600A.

16928-0000-0

The 16928-0000-0 Adapter Plug changes the pin-out matching from older LEM / Danfysik Current Transducers (IT 600-S and 866-600I) to newer LEM / Danfysik (IT 700-S or 867-700I) or DaniSense transducers.

Additional Data: 16928-0000-0_A_IST600S_Adaptor_Plug

V110

V110 Soft Magnetic Core, Toroidal, VITROPERM, 500F 63mm x 50mm x 25mm VAC Nanocrystalline Vitroperm Cores as Common Mode Choke

Additional Data:
VAC Brochure: VAC Nanocrystalline Vitroperm Core EMC Products
GMW Technical Presentation, Page 13, “Common Mode Choke”: Accurate Power Conversion Measurements on High Power Motor Drives

Pricing

DaniSense Current Transducer Heads, DSSIU, Cables and Accessories are compatible with LEM IT Ultrastab Current Transducers.

DS50 Current Transducers

Part No.DescriptionPriceIn Stock
DS50UB-10V

Current Transducer, 50Arms/±55A Peak, 10V/±11V Signal, DSUB Power, BNC Signal

$920
Quantity Price
1 - 9 $920.00
10+ $874.00

DS200 Current Transducers

Part No.DescriptionPriceIn Stock
DC200IF

Current Transducer, 200Arms/±300A Peak, 1:1000 Turns Ratio, 200mA/±300mA Signal, faston connector

$270.00
Quantity Price
1 - 9 $270.00
10+ $256.50
DS200ID

Current Transducer, 200Arms/±370A Peak, 1:500 Turns Ratio, 400mA/±740mA Signal, DSUB Connector

$610.00
Quantity Price
1 - 9 $610.00
10+ $579.50
DS200ID-CD100

Current Transducer, 200Arms/±370A Peak, 1:500 Turns Ratio, 400mA/±740mA Signal,100 turn test winding (separate LEMO), DSUB Connector

$690.00
DS200ID-CD1000

Current Transducer, 200Arms/±370A Peak, 1:500 Turns Ratio, 400mA/±740mA Signal,1000 turn test winding (separate LEMO), DSUB Connector

$790.00
DS200UB-1V

Current Transducer, 200Arms/±300A Peak, 1V/±1.5V Signal, DSUB Power, BNC Signal

$850.00
DS200UB-10V

Current Transducer, 200Arms/±220A Peak, 10V/±10V Signal, DSUB Power, BNC Signal

$970.00
Quantity Price
1 - 9 $970.00
10+ $921.50

DS300, DS400 Current Transducers

Part No.DescriptionPriceIn Stock
DS300ID

Current Transducer, 300Arms/±450A Peak, 300mA/±450mA Signal, DSUB Connector

$730.00
Quantity Price
1 - 9 $730.00
10+ $693.50
DS400ID

Current Transducer, 400Arms/±600A Peak, 1:2000 Turns Ratio, 200mA/±300mA Signal, DSUB Connector

$730.00

DS600 Current Transducers

Part No.DescriptionPriceIn Stock
DS600ID

Current Transducer, 600Arms/±1kA Peak, 1:1500 Turns Ratio, 400mA/±667mA Signal, DSUB Connector

$850
Quantity Price
1 - 9 $850.00
10+ $807.50
DS600ID-CD100

Current Transducer, 600Arms/±1kA Peak, 1:1500 Turns Ratio, 400mA/±667mA Signal, 100 turn test winding (separate LEMO), DSUB Connector

$970.00
DQ600ID

Current Transducer, 600Arms/±1kA Peak, 1:1500 Turns Ratio, 400mA/±866mA Signal, Single +15V Supply, DSUB Connector

$850.00
Quantity Price
1 - 9 $850.00
10+ $807.50
DQ600ID-P1300

Current Transducer, 600Arms/±1.3A Peak, 1:1500 Turns Ratio, 400mA/±866mA Signal, Single +15V Supply, DSUB Connector

$1090.00
Quantity Price
1 - 9 $1,090.00
10+ $1,035.50
DS600UB-1V

Current Transducer, 600Arms/±900A Peak, 1V/±1.5V Signal, DSUB Power, BNC Signal

$1090.00
DS600UB-10V

Current Transducer, 600Arms/±600A Peak, 10V/±10V Signal, DSUB Power, BNC Signal

$1210.00
Quantity Price
1 - 9 $1,210.00
10+ $1,149.50

DS500, DS640, DS1000 Current Transducers

Part No.DescriptionPriceIn Stock
DQ500ID

Current Transducer, 500Arms/±800A Peak, 1:1750 Turns Ratio, 286mA/±457mA Signal, DSUB Connector

$850.00
Quantity Price
1 - 9 $850.00
10+ $807.50
DQ640ID-B

Current Transducer, 640Arms/±1kA Peak, 1:40 to 1:640 Turns Ration (programmable, steps of 20), DSUB Connector

$1330.00
DS1000UB-10V

Current Transducer, 1kArms/±1kA Peak, 10V/±10V Signal, DSUB Power, BNC Signal

$1330.00

DM1200 Current Transducers

Part No.DescriptionPriceIn Stock
DM1200ID

Current Transducer, 1.2kArms/±1.8kA Peak, 1:1500 Turns Ratio, 800mA/±1200mA Signal, DSUB Connector

$1610.00
DM1200UB-10V

Current Transducer, 1.2kArms/±1.2kA Peak, 10V/±10V Signal, DSUB Power, BNC Signal

$1955.00
DM1200UB-1V

Current Transducer, 1.2kArms/±1.8kA Peak, 1V/±1.5V Signal, DSUB Power, BNC Signal

$1840.00

DL2000 Current Transducers

Part No.DescriptionPriceIn Stock
DL2000ID

Current Transducer, 2kArms/±3kA Peak, 1:1500 Turns Ratio, 1.33A/±2A Signal, DSUB Connector

$3860.00
Quantity Price
1 - 9 $3,860.00
10+ $3,667.00
DL2000ID-CB100

Current Transducer, 2kArms/±3kA Peak, 1:1500 Turns Ratio, 1.33A/±2A Signal, 100 turn test winding (separate BNC), DSUB Connector

$4100.00
DL2000ID-CD100

Current Transducer, 2kArms/±3kA Peak, 1:1500 Turns Ratio, 1.33A/±2A Signal, 100 turn test winding , DSUB Connector

$4100.00
DL2000UB-1V

Current Transducer, 2kArms/±3kA Peak, 1V/±1.5V Signal, DSUB Power, BNC Signal

$4220.00
Quantity Price
1 - 9 $4,220.00
10+ $4,009.00
DL2000UB-10V

Current Transducer, 2kArms/±2kA Peak, 10V/±10V Signal, DSUB Power, BNC Signal

$4340.00

DS5000 Current Transducers

Part No.DescriptionPriceIn Stock
DR5000IM

Current Transducer, 5kArms/±8kA Peak, 1:2500 Turns Ratio, 2A/±3.2A Signal, includes Separate Electronics Box, Banana Plugs Output

$7780.00
DR5000UL-10V/7500A

Current Transducer, 5kArms/±7.5kA Peak, 10V Signal at 7.5kA, includes Separate Electronics Box, Banana Plugs Output

$9280.00

DS10000, DR10000 Current Transducers

Part No.DescriptionPriceIn Stock
DR10000IM

Current Transducer, 10kArms/±11kA Peak, 1:2500 Turns Ratio, 4A/±4.4A Signal, includes Separate Electronics Box, Banana Plugs Output

$14,150
DR10000UX-10V

Current Transducer, 10kArms/±11kA Peak, +/-10V Signal, includes Separate Electronics Box, Banana Plugs Output

$16400.00

DSSIU-4 Multi-Channel Interface and Power Supply

Part No.DescriptionPriceIn Stock
DSSIU-4-1U

Current Transducer Interface, four-channel, DSUB to Transducer and Banana Plug Signal Connectors

$1140.00
Quantity Price
1 - 9 $1,140.00
10+ $1,083.00
DSSIU-6-1U

Current Transducer Interface, six-channel, Calibration Current Connectors, Optional VOM (voltage output module) per channel (specify upon order), DSUB to Transducer and Banana Plug Signal Connectors

$1370.00
Quantity Price
1 - 9 $1,370.00
10+ $1,301.50
DSSIU-6-1U-V

Current Transducer Interface, six-channel, Calibration Current Connectors, DSUB to Transducer anx XLRmini Voltage Output. Specify VOM per channel.

$1370.00
VOM0100-1

Voltage Output Module, 1V/100mA, 150mA max

$250.00
VOM0100-10

Voltage Output Module, 10V/100mA, 100mA max

$370.00
VOM0200-1

Voltage Output Module, 1V/200mA, 300mA max

$250.00
VOM0200-10

Voltage Output Module, 1V/200mA, 200mA max

$370.00
VOM0300-1

Voltage Output Module, 1V/300mA, 450mA max

$250.00
VOM0300-10

Voltage Output Module, 1V/300mA, 300mA max

$370.00
VOM0400-1

Voltage Output Module, 1V/400mA, 600mA max

$250.00
VOM0400-10

Voltage Output Module, 1V/400mA, 400mA max

$370.00
VOM0667-1

Voltage Output Module, 1V/667mA, 1A max

$250.00
VOM0667-10

Voltage Output Module, 10V/667mA, 667A max

$370.00
VOM1333-1

Voltage Output Module, 1V/1.33A, 2A max

$350
VOM1333-10

Voltage Output Module, 10V/1.33A, 1.33A max

$490.00

Accessories

Part No.DescriptionPriceIn Stock
S102CT-5R00

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 5Ω, recommended power <0.3W

$25
S102CT-10R0

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 10Ω, recommended power <0.3W

$17
S102CT-50R0

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 50Ω, recommended power <0.3W

$17
S102CT-20R0

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 20Ω, recommended power <0.3W

$17
S102CT-100R

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 100Ω, recommended power <0.3W

$17
DS-BR-10-BNC

Burden Resistor Module, 10Ω, 100mA, Banana to BNC

$100
DS-BR-5-BNC

Burden Resistor Module, 5Ω, 250mA, Banana to BNC

$110
DS-BR-2.5-BNC

Burden Resistor Module, 2.5Ω, 400mA, Banana to BNC

$130
DS-BR-1.67-BNC

Burden Resistor Module, 1.67Ω, 600mA, Banana to BNC

$160
DS-BR-1.00-BNC

Burden Resistor Module, 1.00Ω, 1200mA, Banana to BNC

$190
DS-BR-0.83-BNC

Burden Resistor Module, 0.83Ω, 1500mA, Banana to BNC

$210
IST-BR-10

Burden Resistor Module, 10Ω, 100mA

$100
IST-BR-5

Burden Resistor Module, 5Ω, 250mA

$110
IST-BR-2.5

Burden Resistor Module, 2.5Ω, 400mA

$130
IST-BR-1.67

Burden Resistor Module, 1.67Ω, 600mA

$160
IST-BR-1.00

Burden Resistor Module, 1.00Ω, 1200mA

$190
IST-BR-0.83

Burden Resistor Module, 0.83Ω, 1500mA

$210
HAA15-0.8-A+G

Power Supply, Open Frame, Linear, Dual, ±15V, 0.8A

$100
HBB15-1.5-A+G

Power Supply, Open Frame, Linear, Dual, ±15V, 1.5A

$120
HCC15-3-A+G

Power Supply, Open Frame, Linear, Dual, ±15V, 3.0A

$200
16928-0000-0

Adapter Plug, Danfysik / LEM to DaniSense

$90
V110

Soft Magnetic Core, Toroidal, VITROPERM, 500F 63mm x 50mm x 25mm

$50

Primary Current Cable and Busbar

Part No.DescriptionPriceIn Stock
16900451

Cable, Primary Current, 500A dc or rms, 1kV

$170
16908-0060-0

Cable, Primary Current, 700A dc or rms, 1kV

$250
199080011

Cable Kit , primary current, 1.5kA dc or rms, 1kV

$820
27908-0000-0

Bus Bar, 600A dc, for IT Ultrastab Current Transducer Head

$100

Power and Signal Output Cables

Part No.DescriptionPriceIn Stock
1416100001

Cable, Transduucer Head to Electronics Box for DR Transducer System, 10m

$970.00
1416100002

Cable, Transduucer Head to Electronics Box for DR Transducer System, 20m

$1090.00
SP10381

Cable, DS, Signal and Power, DB9M/Unterminated, 2m1

$45
1411100001

Cable, DS, Signal and Power, DB9M/DB9F, 2m

$80.00
Quantity Price
1 - 9 $80.00
10+ $76.00
SP10005

Cable, DS, Signal and Power, DB9M/DB9F, 5m1

$45
1411100002

Cable, DS, Signal and Power, DB9M/DB9F, 5m

$110.00
Quantity Price
1 - 9 $110.00
10+ $104.50
1411100003

Cable, DS, Signal and Power, DB9M/DB9F, 10m

$150.00
Quantity Price
1 - 9 $150.00
10+ $142.50
1411100005

Cable, DS, Signal and Power, DB9M/DB9F, 15m1

$190.00
1411100004

Cable, DS, Signal and Power, DB9M/DB9F, 20m1

$240.00
1417100003

Cable, DS, Voltage Output Signal, XLRm/Banana plugs, for DSSIU-6U-V

$120.00

1 Not suitable for DL2000 Current Transducers.

Calibration and Repair

GMW provides application and engineering and calibration support for DaniSense Current Transducers.

For Calibration and Service of DaniSense Current Transducers see Calibration & Service

Quantity Discount Schedule:
Quantity 1 – 9 10 – 24
Discount 0% 5%

For multi-channel Current Transducer Systems, see Systems Pricing.

Systems Pricing

DaniSense Current Transducer Kits for Multi-channel Current Measurement

APPLICATIONS:

These Current Transducer Systems provide range extension to high current for power analyzers and data loggers. Current output is preferred over voltage output for high accuracy measurements.

All the channels Current Transducer Kits don’t need to be the same full-scale Current Transducer. The available DS200, DS600, and DS2000 Current Transducers may be be mixed within a system. For example, one DS600 DCCT could be used to measure the DC current to a Motor Drive and two DS200 DCCTs used to measure two phases to the Motor. See Complete System Mixed DCCTs configurations below for more examples.

DaniSense Current Transducer Heads, DSSIU, Cables and Accessories are compatible with LEM IT Ultrastab Current Transducers.

Model / Part No. Description Price
Complete System with 200Arms DCCTs, includes Signal Cables
DS-SYS-1xDS200 DS200 1-channel System, consists of:
1 DS200ID Current Transducer
1 DSSIU-4-1U-channel Interface and Power Supply
1 SP10005 Signal Cable, DB9-DB9, 5m
$1,795
DS-SYS-2xDS200 DS200 2-channel System, consists of:
2 DS200ID Current Transducers
1 DSSIU-4-1U 4-channel Interface and Power Supply
2 SP10005 Signal Cables, DB9-DB9, 5m
$2,450
DS-SYS-3xDS200 DS200 3-channel System, consists of:
3 DS200ID Current Transducers
1 DSSIU-4-1U 4-channel Interface and Power Supply
3 SP10005 Signal Cables, DB9-DB9, 5m
$3,105
DS-SYS-4xDS200 DS200 4-channel System, consists of:
4 DS200ID Current Transducers
1 DSSIU-4-1U 4-channel Interface and Power Supply
4 SP10005 Signal Cables, DB9-DB9, 5m
$3,760
DS-SYS-5xDS200 DS200 5-channel System, consists of:
5 DS200ID Current Transducers
1 DSSIU-6-1U 6-channel Interface and Power Supplies
5 SP10005 Signal Cables, DB9-DB9, 5m
$4,645
DS-SYS-6xDS200 DS200 6-channel System, consists of:
6 DS200ID Current Transducers
1 DSSIU-6 6-channel Interface and Power Supplies
6 SP10005 Signal Cables, DB9-DB9, 5m
$5,300
Complete System with 600Arms DCCTs, includes Signal Cables
DS-SYS-1xDS600 DS600 1-channel System, consists of:
1 DS600ID Current Transducer
1 DSSIU-4-1U 4-channel Interface and Power Supply
1 SP10005 Signal Cable, DB9-DB9, 5m
$2,035
DS-SYS-2xDS600 DS600 2-channel System, consists of:
2 DS600ID Current Transducers
1 DSSIU-4-1U 4-channel Interface and Power Supply
2 SP10005 Signal Cables, DB9-DB9, 5m
$2,930
DS-SYS-3xDS600 DS600 3-channel System, consists of:
3 DS600ID Current Transducers
1 DSSIU-4-1U 4-channel Interface and Power Supply
3 SP10005 Signal Cables, DB9-DB9, 5m
$3,825
DS-SYS-4xDS600 DS600 4-channel System, consists of:
4 DS600ID Current Transducers
1 DSSIU-4-1U 4-channel Interface and Power Supply
4 SP10005 Signal Cable, DB9-DB9, 5m
$4,720
DS-SYS-5xDS600 DS600 5-channel System, consists of:
5 DS600ID Current Transducers
1 DSSIU-6-1U 6-channel Interface and Power Supplies
5 SP10005 Signal Cables, DB9-DB9, 5m
$5,845
DS-SYS-6xDS600 DS600 6-channel System, consists of:
6 DS600ID Current Transducers
1 DSSIU-6-1U 6-channel Interface and Power Supplies
6 SP10005 Signal Cables, DB9-DB9, 5m
$6,740
Complete System with 2000Arms DCCTs, includes Signal Cables
DS-SYS-1xDS2000 DS2000 1-channel System, consists of:
1 DL2000ID-CB100 Current Transducer
1 DSSIU-4-1U 4-channel Interface and Power Supply
1 1411000002 Signal Cable, DB9-DB9, 5m
$5,350
DS-SYS-2xDS2000 DS2000 2-channel System, consists of:
2 DL2000ID-CB100 Current Transducers
1 DSSIU-4-1U 4-channel Interface and Power Supply
2 1411000002 Signal Cables, DB9-DB9, 5m
$9,560
DS-SYS-3xDS2000 DS2000 3-channel System, consists of:
3 DL2000ID-CB100 Current Transducers
1 DSSIU-4-1U 4-channel Interface and Power Supply
3 1411000002 Signal Cables, DB9-DB9, 5m
$13,770
DS-SYS-4xDS2000 DS2000 4-channel System, consists of:
4 DL2000ID-CB100 Current Transducers
1 DSSIU-4-1U 4-channel Interface and Power Supply
4 1411000002 Signal Cables, DB9-DB9, 5m
$17,980
DS-SYS-5xDS2000 DS2000 5-channel System, consists of:
5 DL2000ID-CB100 Current Transducers
1 DSSIU-6-1U 6-channel Interface and Power Supplies
5 1411000002 Signal Cables, DB9-DB9, 5m
$22,420
DS-SYS-6xDS2000 DS2000 6-channel System, consists of:
6 DL2000ID-CB100 Current Transducers
1 DSSIU-6-1U 6-channel Interface and Power Supplies
6 1411000002 Signal Cables, DB9-DB9, 5m
$26,630

Complete System with Mixed DCCTs, includes Signal Cables
DS-SYS-1xDS600-3xDS200 1 x DS600 3 x DS200 4-channel system, consists of:
1 DS600ID Current Transducer
3 DS200ID Current Transducers
1 DSSIU-4-1U 4-channel Interface and Power Supply
4 SP10005 Signal Cables, DB9-DB9, 5m
$4,000
DS-SYS-1xDS2000-3xDS200 1 x DS2000 3 x DS200 4-channel system, consists of:
1 DL2000ID-CB100 Current Transducer
3 DS200ID Current Transducers
1 DSSIU-4-1U 4-channel Interface and Power Supply
3 SP10005 Signal Cables, DB9-DB9, 5m
1 1411000002 Signal Cable, DB9-DB9, 5m
$7,315
DS-SYS-1xDS2000-3xDS600 1 x DS2000 3 x DS600 4-channel system, consists of:
1 DL2000ID-CB100 Current Transducer
3 DS600ID Current Transducers
1 DSSIU-4-1U 4-channel Interface and Power Supply
3 SP10005 Signal Cables, DB9-DB9, 5m
1 1411000002 Signal Cable, DB9-DB9, 5m
$8,035

Terms and Conditions

Terms and Conditions:

Prices above are for domestic deliveries to Canada, USA and Mexico only.
Prices are expressed in U.S. Dollars, FCA San Carlos, California.
Prices are subject to change without notice.

Payment:

Visa, MasterCard, Amex, or Net 30 days (subject to credit acceptance).

Delivery:

From Stock to 60 Days