Senis Magnetic Field Transducer, 1-Axis
A SENIS Hall magnetic field transducer consists of two modules:
- Module H, consisting of the Hall probe and the CaH cable
- Module E, containing the analog electronics for signal conditioning
To build up a complete measurement system, the module E needs to be connected to an adequate power supply and to a voltmeter (or A/D converter) for each measured component of a magnetic field.
Key Features, I1A:
- Integrated CMOS 1-axis Hall Probe (measures magnetic fields perpendicular to the probe plane)
- Very low noise and offset fluctuations
- Very high linearity
- Negligible inductive loops on the Probe
- Integrated temperature sensor on the probe for temperature compensation
- Range: ±20mT … ±20T
- Bandwidth: 2.5kHz
Key Features, F1A:
- Fully Integrated CMOS 1-axis Hall Probe (measures magnetic fields perpendicular to the probe plane)
- Very high spatial resolution
- Virtually no planar Hall Effect
- High frequency bandwidth
- High disturbance immunity
- Negligible inductive loops on the Probe
- Integrated temperature sensor on the probe for temperature compensation
- Range: ±20mT … ±20T
- Bandwidth: 2.5kHz
Tech Support
- Single-Axis I1A Magnetic Field Transducer Datasheet
- Single-Axis F1A Magnetic Field Transducer Datasheet
- Probe Type ‘A’ for I1A Transducer Datasheet
- Probe Type ‘A’ for F1A Transducer Datasheet
- Probe Type ‘G’ for I1A Transducer Datasheet
- Probe Type ‘G’ for F1A Transducer Datasheet
- Probe Type ‘H’ for I1A Transducer Datasheet
- Probe Type ‘H’ for F1A Transducer Datasheet
- Probe Type ‘K’ for I1A Transducer Datasheet
- Probe Type ‘K’ for F1A Transducer Datasheet
- Output cable COxx-G Drawing – Revised January 2016 (new style cables manufactured after Dec. 12, 2009, serial numbers after xx09)
- Output cable COxx Drawing – Revised April 2010
(old style cables manufactured before Dec. 12, 2009, serial numbers before xx09) - Power Supply S-12 Data Sheet – Revised Nov 2007
- KVxx Power Cable Connector Datasheet – Revised Dec 2009 [German]
- SVxx Signal Cable Connector Datasheet – Revised Dec 2009 [German]
- Transverse Mount Probe Holder 11901230 Revision F Drawing
- Senis 1DSA Signals Adapater Data Sheet – Revised Dec 2009
- Zero Gauss chamber ZG12 Drawing
Accessories
S12-5 - Power Supply
Switch Mode power supply for Senis Hall Effect Transducers. 100-240VAC, 0.8A, 50-60Hz input
ZG12 - Zero Gauss Chamber
Used for zeroing the reading.
Dimenisons: 25mm Outer Diameter, 21mm Inner Diameter, 200mm Length.
Shielding Factor: 100
Mating Connectors
SV81 - Mating Connector for CO50-G, Male plug Signal Output
KV50 - Mating Connector, Male plug, Power Input
CO50-G - Signal Output Cable
Signal Output Cable, Unterminated on one end, 5.0m.
Transverse Probe Holder
11901230 Probe Holder for MPT type probes to be mounted transversely.
11906-0000-0 - Probe Holder, Transverse, non-metallic.
1DSA-05 - Single-Axis Differential-to-Single Ended Signals Adapter
Adapter for conversion of differential voltage to corresponding single-ended voltage.
Pricing
One-Axis Hall Probes and Transducers
Configured Transducers Normally in Stock. Refer to I1A and F1A datasheets for complete list.
| Part No. | Description | Price | In Stock |
|---|---|---|---|
| I1A-0YA02F-J05T0K5J | Single Axis Low Noise Hall Transducer, Probe Type ‘A’, 2m Cable, Fixed Connector, 5T, 0.5kHz, 0.1%z Linearity | $3,650.00 | |
| I1A-0YA02F-J02T0K5J | Single Axis Low Noise Hall Transducer, Probe Type ‘A’, 2m Cable, Fixed Connector, 2T, 0.5kHz, 0.1% Linearity | $3,700.00 | |
| I1B-0YC02F-J.2T0K5J | Single Axis Low Noise Hall Transducer, Probe Type ‘C’, 2m Cable, Fixed Connector, 0.2T, 0.5kHz, 0.1% Linearization. Includes Power Adapter and CO20-X Output Signal Cables. | $4,360.00 | |
| I1B-0YC02F-J.2T2K5J | Single Axis Low Noise Hall Transducer, Probe Type ‘C’, 2m Cable, Fixed Connector, 0.2T, 2.5kHz, 0.1% Linearization. Includes Power Adapter and CO20-X Output Signal Cables. | $4,360.00 | |
| F1A-0YK02C-C05T2K5Q | Single Axis Hall Transducer, Probe Type ‘K’, 2m Cable, Detachable Connector, 5T, 0.5kHz, Not Linearized (characterized to 2T) | $3,940.00 |
Accessories
| Part No. | Description | Price | In Stock |
|---|---|---|---|
| S12-5 | Power Supply, ±12V, 90 – 264Vac, 1.8m Cable | $540.00 | |
| 11901230 | Probe Holder, aluminum, transverse | $150.00 | |
| 11906-0000-0 | Probe Holder, Transverse, non-metallic | $200.00 | |
| CO50-G | Signal Output Cable, Unterminated on one end, 5.0m | $290.00 | |
| 11913-0005-0 | 3MTS-2 probe holder, transverse, aluminum | $290.00 | |
| ZG12 | Zero Gauss Chamber | $420.00 | |
| SV81 | Mating Connector for CO50-G, Signal Output | $40.00 | |
| KV50 | Mating Connector, Power Input | $40.00 | |
| 1DSA-05 | Differential to Single Ended Signals Adapter | $1,270.00 |
Calibration & Repair
| Part No. | Description | Price | In Stock |
|---|---|---|---|
| MFT-1A-CAL | Single-Axis, Sensitivity & Linearity Calibration | $730.00 |
| Quantity Discount Schedule: | ||||
|---|---|---|---|---|
| Quantity | 1 – 4 | 5 – 9 | 10 – 19 | 20 + |
| Discount | 0% | 10% | 15% | Contact GMW |
Terms and Conditions
Terms and Conditions:
Prices above are for deliveries to USA, Canada, and Mexico only.
For deliveries in all other countries please contact Senis.
Prices are expressed in U.S. Dollars, FCA San Carlos, California.
Prices are subject to change without notice.
OEM discounts are available.
Payment:
Visa, MasterCard, Amex, Prepayment before shipment, or Net 30 days (subject to credit acceptance).
Delivery:
Stock to 90 days, depending on quantity.