The S-band / L-band Beam Position Monitor (S–BPM) is an electronics module for fast analog processing of beam pickups signals. Single-pass bunch and macropulses can be measured thanks to parallel processing of inputs. Macropulses and single bunches up to 2 MHz repetition rate can be measured individually. X and Y coordinates are memorized until the next macropulse of bunch. CW beam can be measured continuously. The X and Y coordinates are available permanently. Beam position motions up to 5 MHz can be observed.
X and Y outputs are strong analog ±2V signals. S-band / L-band BPM is compatible with Bergoz’ multiplexed BPM and Log-ratio BPMs. They can be plugged into the same chassis.
Precise phase matching of input signals is not required.
One Front-end Filter / Amplifier is required for every BPM pickup electrode. It is tuned to the beam RF or harmonic. It is powered from the S–BPM module via the coaxial cable linking them together. It must be installed close to the BPM pickup block, e.g. 1 meter.
- Non-interceptive beam position measurement.
- Beam charge range > 1000.
- For linacs, microtrons and transfer lines
- Single bunch, macropulse and CW.
- Timing calibrations.
|Quantity Discount Schedule:|
|Quantity||1 – 4||5 – 9||10 – 24|
Please telephone or fax your Purchase Order and Credit Card information to GMW Associates at the numbers below.
Terms and Conditions
Terms and Conditions:
Prices above are for domestic deliveries to USA, Canada, and Mexico only.
For deliveries in all other countries please contact Bergoz.
Prices are expressed in U.S. Dollars, FCA San Carlos, California.
Prices are subject to change without notice.
Higher quantity and OEM discounts are available.
Visa, MasterCard, Amex, Prepayment before shipment, or Net 30 days (subject to credit acceptance).
Stock to 90 days, depending on quantity.