The Model 5451 Helmholtz Coil Electromagnet is a single axis coil pair arranged in Helmholtz geometry to give a relatively large volume of high uniformity magnetic field. The 5451 Helmholtz Coil Electromagnet has an aperture diameter of 300 mm (11.8 inch) with an operating range to 54 mTrms (540 Grms). The Helmholtz Coil Electromagnet can be mounted in any orientation and with a mass of 100 kg (220 lbs) the 5451 can be integrated into experimental or test equipment. Since the Helmholtz Coil configuration is not magnetically shielded, magnetic and electrical conducting materials should be kept at least 1 m from the Electromagnet center to avoid excess distortion of the magnetic field within the working volume.
- Mass = 100kg
- 340 x 480 x 415mm
- 50mT field over 300mm diameter
- Low field NMR & EPR Spectrometry
- Materials measurement
- Sensor testing, development and calibration
- Electronic sensitivity
- Biological affects
- Model 5451 Users manual
- 5972 Magnet Control User’s Manual
- Model 5971-160 Current Reversal Switch Manual
- LabVIEW Magnet Control Software Users Manual
- Sorensen DLM 600 Series Power Supply Operation Manual
- Sorensen DLM 600 Series Power Supply Datasheet
- BV Thermal Mercury Series Water Chiller manual
- Kepco BOP Power Supplies – User Manuals
- GMW Software Download Instructions
- ThermoFlex Basic User’s Manual
- Effects of Environmental Magnetic Field on Model 5451 Helmholtz Coil Electromagnet
- Magnetic Environment & Safety
- USB DaqPad: model NI USB-6251
- NI PCI-GPIB
- NI PCIe-GPIB
We offer several different power supplies for the 5451 electromagnet; the Sorensen switch mode, and the Danfysik high stability linear.
We offer Sorensen unipolar supplies which are suitable for applications were a DC field is required. They feature a stability of 0.05% over 8 hours and they are available with an optional IEEE-488 interface. Order part numbers:
DLM40-75E - Power supply, 40V, 75A, unipolar, without IEEE-488 interface
DLM40-75EM9E - Power supply, 40V, 75A, unipolar, with IEEE-488 interface
DLM40-100E - Power supply, 40V, 100A, unipolar, without IEEE-488 interface
DLM40-100EM9E - Power supply, 40V, 100A, unipolar, with IEEE-488 interface
For applications that require a bipolar power supply, we offer the Kepco BOP series. They feature stability of 0.02% over 8 hours, and an optional IEEE-488 interface may be installed either by GMW, or by the user at a later date. With two of the Kepco BOP 20V, 20A, supplies wired in parallel to acheive 20V, 40A will be sufficient for a 5451 Modest Power Bipolar System or for intermittent operation with air cooling. The two BOP20-20D wired in parallel will not achieve maximum power of the 545.
BOP20-20DL Power supply, 20V, 20A, bipolar.
Magnet Current Cables
We take the trouble out of connecting your magnet to the power supply with a wide variety of pre-terminated cable assemblies.
Power Supply direct to Magnet:
16907-0058-0 - Cable, Current & Interlock, DLM40-75E/DLM40-100E to 5451, 70A, 5m.
16907-0058-2 - Cable, Current & Interlock, 2x BOP 20-20V to 5451, 20A, 5m.
16907-0058-1 - Cable, Current & Interlock, 858 70A/30V to 5451, 70A, 5m
Power Supply to Current Reversal Switch
16907-0062-0 - Cable, Current & Interlock, DLM50-75E to 5971-160, 5m
Current Reversal Switch to Magnet:
16907-0058-4 - Cable, Current & Interlock, 5971-160 to 5451, 5m
Software and PC Interface Cards
LVPTMPS - Driver for SGA power supplies with IEEE-488 interface.
LVKCMPS - Driver for Kepco power supplies with IEEE-488 interface.
LVMCTRL - Driver for complete closed-loop control of magnet system, power supply, and teslameter (gaussmeter) drivers.
* Note: The above listed drivers require LabVIEW 8.21 or newer version.
776670-09 - National Instruments LabVIEW Full System for Windows with 1 Yr Service (English).
778032-01 - National Instruments IEEE-488 PC interface card, PCI bus.
BIT-4886 - IEEE-488 Interface Card for BOP Power Supply, 16 bit.
Systems & Pricing
5451 Electromagnet Systems
GMW is pleased to offer the following two preconfigured magnet systems.
Unipolar Field SystemWith applications to materials measurement, sensor development, electronic sensitivity and biological effects.
Unipolar Field System with Field ReversalWith applications to materials measurement, sensor development, electronic sensitivity and biological effects.
Terms and Conditions
Terms and Conditions:
Prices above are for domestic deliveries to USA, Canada, and Mexico only.
Prices to other Countries are approximately 1.1x USA List Price.
Prices are expressed in U.S. Dollars, FCA Origin San Carlos, California 94070.
Prices are subject to change without notice.
OEM discounts are available.
Visa, MasterCard, Amex, Prepayment before shipment, or Net 30 days (subject to credit acceptance).
Orders may be submitted to email@example.com
Stock to 120 days.