5403 Dipole, 76mm
The 5403 Electromagnet is an variable gap C frame dipole electromagnet. It is used in research and industrial applications where a large pole gap and coil spacing is required for the sample or ancillary equipment. It can be operated to high current for intermittent operation or low current for continuous operation. The light weight allows it to be used on optical tables or production test equipment and the simple poles enable axial entry & exit holes to be matched to the optical geometry.
The 5403AC Electromagnet is similar in design to the standard 5403 except that the poles and yoke are laminated for AC field applications. This magnet can be used for teaching, research and industrial applications where fast field ramping and settling is required. The light weight allows it to be used on optical tables and the poles include provision for axial optical holes.
The 5403EG Electromagnet is an extended fixed gap C frame dipole electromagnet. This magnet is similar to the standard 5403 but has air-cooled coils to provide a larger clearance between the coils. It is used in research and industrial applications where a large pole gap and coil spacing is required for the sample or ancillary equipment. It can be operated to high current for intermittent operation or low current for continuous operation. The light weight allows it to be used on optical tables or production test equipment and the simple poles enable axial entry & exit holes to be matched to the optical geometry.
Features
- Mass = 124kg
- 604 x 270 x 359mm
- Adjustable pole gap, 0 to 86mm
- Variety of pole caps, 10, 38, 76mm
- 1T @ 35mm, 2T @ 15mm gap
Applications
- Hall Effect Studies
- Magneto-Optical Studies
- Laboratory Experiments
- Magnetic Separation experiments
- Magnetic alignment of small components
- Chemical reaction rate studies
Tech Support
- Model 5403 Specifications
- Model 5403AC Specifications
- 5972 Magnet Control Specifications
- GMW-RC-1920 Rack Cabinet Specifications
- Senis Probe Type “A” Specifications
- 5971-160 Current Reversal Switch Specifications
- Sorensen DLM 600 Series Power Supply Datasheet
- FASTPS050030 Datasheet
- ThermoFlex Recirculating Chillers Specification
- Model 5403 & 5403FG User’s Manual (for serial numbers >199)
- Model 5403EG-20 & 5403EG-50 User’s Manual
- Model 5403AC User’s Manual
- Model 5403AC General Assembly
- Motorized Rotating Drive User’s Manual
- LabVIEW Magnet Control Software User’s Manual
- BPS-85-70 User’s Manual
- Model 5403 Minimum Facility Requirements
- Model 5970 Current Reversal Switch [Discontinued]
- Model 5971-160 Current Reversal Switch Manual
- Model 5972 Magnet Control User’s Manual
- Group3 ADI-123 GUXCTS Analog Device Interface
- Sorensen DLM 600 Series Power Supply Operation Manual
- FASTPS050030 User Manual
- FASTPS050030 Remote Control Manual
- BV Thermal Mercury Series Water Chiller Manual(For older Magnet Systems)
- 3D Models, Box.com link
- Model 5403 & 5403FG Users Manual (for serial numbers <199) (Obsolete, see 5403 & 5403FG User manual for serial numbers> 199)
- Model 5403EG Users Manual (Obsolete, see 5403EG-20 & 5403EG-50)
- Model 5403 Fringe Field 40A
- Model 5403AC Test Data
- Model 5403AC w/IECO BPS-85-70 Power Supply Test Data
- Model 5403 Excitation Data
- Model 5403 Excitation Data with Poles Removed
- IECO Power Supply Test – 5403
- MMM 2007 Presentation of Model 5403AC with 231HC Bipolar Current Amplifier
- MMM 2005 Presentation of Model 5201 & Model 5403AC Electromagnets
- Magnetic Environment & Safety
- Fly Back Diode Protection of a Unipolar Power Supply connected to an Electromagnet
- USB DaqPad: model NI USB-6251
- NI PCI-GPIB
- NI PCIe-GPIB
- How to Determine the Amount of Heat a Recirculating Chiller Adds to a Room
- Proper Fluid Selection and Maintenance for Heat Transfer Applications
- “Small magnets reveal big secrets”, Research in spin dynamics for magnetic nanoparticles and nanodevices, Professor Igor Barsukov, UC Riverside
Accessories
Power Supplies
We offer two different types of power supplies for the 5403 electromagnet; unipolar and bipolar.
We offer Sorenson unipolar supplies suitable for applications were a DC field is required. They feature a stability of 0.05% over 8 hours and they are available with an optional IEEE-488 interface. Order part numbers:
DLM40-75EM9E - Power Supply, 40V, 75A, unipolar, 0.05% / 8hrs, IEEE-488. Input voltage: 180 - 264V, 50/60Hz, 16A, 1P.
DLM40-75E - Power Supply, 40V, 75A, unipolar, 0.05% / 8hrs, analog programming. Input voltage: 180 - 264V, 50/60Hz, 16A, 1P
For applications that require a bipolar power supply, we offer the Kepco BOP series. They feature stability of 0.02% over 8 hours, and an optional IEEE-488 interface may be installed either by GMW, or by the user at a later date. The 5403 requires two of the Kepco BOP 20V, 20A, supplies wired in paralllel to acheive 20V, 40A. Order part number:
BOP20-20DL Power supply, 20V, 20A, bipolar.
BIT-4886 IEEE-488 interface for Kepco BOP power supplies, 16-bit.
If field reversal is required when using a a unipolar Power Supply, we offer the 5971-160 Current Reversal Switch. This Switch provides a safe way of reversing the magnets current under either manual or computer control. The USB Interface also provides control fo the Power Supply current, and readback of the Power Supply current and voltage. It will also provide field readback from a Senis Field Transducer if installed.
Magnet Current Cables
Power Supply direct to Magnet:
16907-0051-0 Cable, Current & interlock, DLM40-75 to 5403, 5m.
16907-0051-2 Cable, Current & interlock, 2 x BOP 20-20DL to 5403, 5m.
16907-0051-1 Cable, Current & interlock, 1 x BOP 20-20DL to 5403, 5m.
16907-0051-3 Cable, Current & interlock, 1 x BOP 25-40MG to 5403, 5m.
Power Supply direct to Extended Gap (EG) Magnet:
16907-0064-1 Cable, Current & interlock, DLM40-75 to 5403-EG, 5m.
16907-0064-0 Cable, Current & interlock, BOP 25-40MG to 5403-EG, 5m.
Power Supply to Reversing Switch:
16907-0062-0 - Cable, Current & Interlock, DLM40-75 to 5971-160, 60A, 2m
Reversing Switch to Magnet:
16907-0051-4 - Cable, Current & Interlock, 5971-160 to 5403, 60A, 5m.
Magnet Poles and Axial Holes
GWM Offers several Poles for the 5403 Electromagnet. Order by part numbers as listed below:
17901700 - Single Pole, 10mm face, for 5403.
17901520 - Single Pole, 38mm face, for 5403.
17901510- Single Pole, 76mm face, for 5403.
17901390 - Single Pole, 38mm face, for 5403EG.
17906560 - Single Pole, 10mm face, long, for 5403EG.
17906550 - Single Pole, 38mm face, long, for 5403EG.
17906540 - Single Pole, 76mm face, long, for 5403EG.
For optical experiments or other applications where an axial hole in one or both poles is required, GMW can provide the poles with the hole pre-drilled to your specifications.
Order part:
5403-AH - Axial hole in one pole, diameter to be specified.
Mounting and Motor Drives
We offer Vertical Mounting Brackets, and Rolling, Rotating, or Rolling and rotating bases for the 5403 Electromanget. A guide rail is also available to guide the rolling bases between magnet test stations.
17901610 Vertical Mount Bracket.
11803170 - Rolling Base for 5403, 3472 & 3473.
11802090 - Rotating Base for 5403, 3472 & 3473.
11803430 - Rolling and Rotating Base for 5403, 3472 & 3473.
Cabinets
GMW-RC-1920 GMW 19" EIA rack cabinet. This handsome half-height 19" rack cabinet provides ample space for your power supply, reversing switch, and other instrumentation.
It is two-tone gray, and is supplied with lift off side panels, castors, and a door mounted on to the back. The door includes two line powered cooling fans to help draw hot air out of the rack. It does not include filler panels and support angles.
Accessories:
P-0119 - Filler panel, 1U, light gray.
P-0319 - Filler panel, 2U, light gray.
P-0519 - Filler panel, 3U, light gray.
P-0719 - Filler panel, 4U, light gray.
P-0819 - Filler panel, 5U, light gray.
SA-30 - Support Angle Pair.
HW-1 - Hardware kit, screws and washers, set of 100.
Software and PC Interface Cards
LVPTMPS - Driver for SGA power supplies with IEEE-488 interface.
LVKCMPS - Driver for Kepco power supplies with IEEE-488 interface.
LVMCTRL - Driver for complete closed-loop control of magnet system, power supply, and teslameter (gaussmeter) drivers.
* Note: The above listed drivers require LabVIEW 8.21 or newer version.
776670-09 - National Instruments LabVIEW Full System for Windows with 1 Yr Service (English).
778927-01- USB-GPIB Interface for Windows XP/Vista/7/8/10.
Pricing
Systems & Pricing
5403 Electromagnet Systems
GMW is pleased to offer the following preconfigured magnet systems.
Unipolar Field System with Field Reversal
- Magneto-Optical Studies
- Magnetic Separation experiments
- Magnetic alignment of small components
- Studying chemical reaction rate changes
- Hall Effect Studies
- Magneto-Optical Studies (MOKE)
- Kerr Effect Studies
- Hall Effect Studies
- Magneto-Optical Studies (MOKE)
- Kerr Effect Studies
full loop measurements can be made in much less than a second for:
- Hall Effect Studies
- Magneto-Optic Measurements
- High Temperature Superconductor Investigations
- Biological Studies
- Chemical Reaction Rate measurement
Terms and Conditions
Exclusive Distributors:
India: Magnergy Technology
Web: www.magnergytech.com
Email: info@magnergytech.com
Japan: TOYO Corporation
Web: www.toyo.co.jp/English/
Email: magne@toyo.co.jp
Spain and Portugal: Helium 3
Web: www.helium3.es
Email: Carlos Montero, c.montero@helium3.es
Terms and Conditions:
Prices above are for domestic deliveries to USA, Canada, and Mexico only.
Prices to other Countries are approximately 1.1x USA List Price.
Prices are expressed in U.S. Dollars, FCA Origin San Carlos, California 94070.
Prices are subject to change without notice.
OEM discounts are available.
Payment Terms:
Visa, MasterCard, Amex, Prepayment before shipment, or Net 30 days (subject to credit acceptance).
Orders may be submitted to sales@gmw.com
Delivery:
Stock to 120 days.