Senis Magnetic Field Transducers, Three-Axis, F3A
A SENIS Hall magnetic field transducer consists of two modules:
- Module H, consisting of the Hall probe and the CaH cable
- Module E, containing the analog electronics for signal conditioning
To build up a complete measurement system, the module E needs to be connected to an adequate power supply and to a voltmeter (or A/D converter) for each measured component of a magnetic field.
F3B Transducers have fixed cable from Probe (H module) to Electronics (E module). F3A Transducers were phased out in March 2023 for fixed cables, and are only for detachable probe cables going forward.
Key Features:
- Fully integrated CMOS 3-axis (Bx, By, Bz) Hall Probe
- Very high spatial resolution (By: 0.03 x 0.005 x 0.03mm3; Bx and Bz: 0.15 x 0.01 x 0.15 mm3)
- High angular accuracy (orthogonality error less than 0.1°)
- Virtually no planar Hall Effect
- High frequency bandwidth (from DC up to 25kHz)
- High disturbance immunity
- Negligible inductive loops on the Probe
- Integrated temperature sensor on the probe for temperature compensation
- Range: ±20mT … ±20T
Tech Support
- F3A Magnetic Field Transducer Datasheet
- F3B Magnetic Field Transducer Datasheet
- Probe Type ‘A’ for F3A Transducer Datasheet
- Probe Type ‘B’ for F3A Transducer Datasheet
- Probe Type ‘C’ for F3A Transducer Datasheet
- Probe Type ‘D’ for F3A Transducer Datasheet
- Probe Type ‘E’ for F3A Transducer Datasheet
- Probe Type ‘G’ for F3A Transducer Datasheet
- Probe Type ‘H’ for F3A Transducer Datasheet
- Probe Type ‘K’ for F3A Transducer Datasheet
- Probe Type ‘L’ for F3A Transducer Datasheet
- Probe Type ‘U’ for F3A Transducer Datasheet
- Output cable CO50-G Drawing (new style cables manufactured after Dec. 12, 2009, serial numbers after xx09)
- Output cable CO50 Drawing (old style cables manufactured before Dec. 12, 2009, serial numbers before xx09)
- Power Supply S-12 Data Sheet
- KVxx Power Cable Connector Datasheet [German]
- SVxx Signal Cable Connector Datasheet [German]
- Transverse Mount Probe Holder 11901230 Revision F Drawing
- Senis 3DSA Three-Axis Signals Adapater Data Sheet
- Zero Gauss chamber ZG12 Drawing
- Output Cable CO20-X Drawing
Accessories
S12-5 - Power Supply
Switch Mode power supply for Senis Hall Effect Transducers. 100-240VAC, 0.8A, 50-60Hz input.
ZG12 - Zero Gauss Chamber
Used for zeroing the reading.
Dimenisons: 25mm Outer Diameter, 21mm Inner Diameter, 200mm Length.
Shielding Factor: 100
Mating Connectors
SV81 - Mating Connector for CO50-G, Male plug Signal Output
KV50 - Mating Connector, Male plug, Power Input
CO50-G - Signal Output Cable
Signal Output Cable, Unterminated on one end, 5.0m.
Transverse Probe Holder
11901230 Probe Holder for MPT type probes to be mounted transversely.
11906-0000-0 - Probe Holder, Transverse, non-metallic.
3DSA-05 - Three-Axis Differential-to-Single Ended Signals Adapter
Adapter for conversion of three differential voltages to corresponding single-ended voltage.
Pricing
Three-Axis Hall Probes and Transducers
Configured Transducers Normally in Stock. Refer to Senis Magnetic Measurement Product Guide for complete list.
| Part No. | Description | Price | In Stock |
|---|---|---|---|
| F3B-03A02F-A.2T2K5M | Three Axis Hall Transducer, Probe Type ‘A’, 2m Cable, Fixed Connector, 0.2T, 2.5kHz, 1% Linearization. Includes Power Adapter and CO20-X Output Signal Cables. | $5,940.00 | |
| F3A-03HS02C-A02T2K5J | Three-axis Hall Transducer, Probe type HS, 2m Cable, Detachable Connector, 2T, 2.5kHz, 0.1% Linearization. Power Adapter (S12-5) and Output Signal Cables (CO50-G) are not included | $8,420.00 | |
| F3B-03A02F-A02T2K5M | Three Axis Hall Transducer, Probe Type ‘A’, 2m Cable, Fixed Connector, 2T, 2.5kHz, 1% Linearization. Includes Power Adapter and CO20-X Output Signal Cables. | $5,940.00 | |
| MISC-SN | SN K3A-2T-4K-5m – 3-axis Hall probe, Cryogenic, Calibration at Room Temperature, 2T range, 5m cable | $18,780.00 |
Accessories
| Part No. | Description | Price | In Stock |
|---|---|---|---|
| S12-5 | Power Supply, ±12V, 90 – 264Vac, 1.8m Cable | $540.00 | |
| 11901230 | Probe Holder, aluminum, transverse | $150.00 | |
| 11906-0000-0 | Probe Holder, Transverse, non-metallic | $200.00 | |
| 11907-0668-0 | Probe Holder, for Senis Type C Probe | $220.00 | |
| CO50-G | Signal Output Cable, Unterminated on one end, 5.0m | $290.00 | |
| ZG12 | Zero Gauss Chamber | $420.00 | |
| SV81 | Mating Connector for CO50-G, Signal Output | $40.00 | |
| KV50 | Mating Connector, Power Input | $40.00 | |
| 3DSA-05 | Three-Axis Differential to Single Ended Signals Adapter | $1,270.00 |
Calibration – Senis Three-Axis Hall Probes and Transducers
| Part No. | Description | Price | In Stock |
|---|---|---|---|
| MFT-1A-CALHIGH | 1-Axis, Sensitivity & Linearity Calibration, High Field (9T) | $2,190.00 | |
| MFT-3A-CAL | 3-Axis, Sensitivity & Linearity Calibration | $1,170.00 | |
| MFT-3A-CALHIGH | 3-Axis, Sensitivity & Linearity Calibration, High Field (9T) | $3,940.00 | |
| MISC-SN-CAL | Cryogenic Calibration of K3A at up to 5T at 4K (+/-2K) | $4,220.00 |
| Quantity Discount Schedule: | ||||
|---|---|---|---|---|
| Quantity | 1 – 4 | 5 – 9 | 10 – 19 | 20 + |
| Discount | 0% | 10% | 15% | Contact GMW |
Terms and Conditions
Terms and Conditions:
Prices not inclusive of US tariffs on products manufactured in other countries. Tariffs rates effective at time of shipment will be added.
Prices above are for deliveries to USA, Canada, and Mexico only.
For deliveries in all other countries please contact Senis.
Prices are expressed in U.S. Dollars, FCA San Carlos, California.
Prices are subject to change without notice.
OEM discounts are available.
Payment:
Visa, MasterCard, Amex, Prepayment before shipment, or Net 30 days (subject to credit acceptance).
Delivery:
Stock to 90 days, depending on quantity.