Danisense Compact and OEM Current Transducers

The DaniSense DT, DC, DP and DX Series Current Transducers are based on a flux-gate zero flux detector with closed-loop operation to provide a signal output current accurately defined by the number of turns in the compensation winding. They provide higher accuracy for Power Analyzer measurements and improved performance for power amplifiers.

 

The DT, DC, DP and DX Series come in compact packages or unpackaged for use in tight spaces or integrated into OEM applications.

Features

  • Very high absolute amplitude and phase accuracy from dc to over 1kHz
  • Low signal output noise
  • Low fluxgate switching noise on the pimary
  • Enhanced electrostatic shielding to increase rejection of primary dV/dt coupling
  • Increased operating temperature range
  • Reduced mechanical dimensions
  • Full-scale current ranges to 200Arms/±285A peak in a self-contained head small enough to fit in 1U chassis or unpackage for OEM integration
  • Amplitude and Phase measurement to 300kHz included with each head

DaniSense Current Transducer Heads, DSSIU, Cables and Accessories are compatible with LEM IT Ultrastab Current Transducers.

Tech Support

  1. Product Selection Guide
  2. DP12IP
  3. DP50IP-B
  4. DP50 Creepage
  5. DT50ID
  6. DT100ID
  7. DT200ID
  8. DC200IF
  9. DX200IH
  1. DSSIU-1
  2. DSSIU-4-1U
  3. DSSIU-6-1U
  4. DSSIU-6-1U-V
  5. 9311300016A-D-SUB Cable for DSSIU v5.7.2016
  6. Vishay S102 Precision Metal Foil Resistor
  7. GMW-CT-BR-X.XX Burden Resistor Module
  8. Condor Linear DC Power Supply HAA15-0.8-A+ and HAA15-1.5-A+
  1. DaniSense Product Manual
  2. Principles of Zero Flux Current Transducers
  3. DW500UB-2V for Power Analyzer
  4. Flux-Gate
  5. Tech Note: “Wrap Around” or Distributed Primary Current Cable
  6. Accurate Power Conversion Measurements on High Power Motor Drives
  7. VAC Nanocrystalline Vitroperm Core EMC Products
  8. Product Name Guide
  9. Product Naming Letter
  10. How to Modify a DSSIU-6 from a Voltage Version to a Current Output Version
  11. How to Choose Danisense Current Transducers and System Interface Units
  12. Application Note: Replacing Shunts with Danisense Current Transducers for Calibration Systems
  13. Application Note: DCCT with Calibration Windings
  14. Application Note: Estimating Current Measurement Uncertainty when Utilizing Current Transducers
  15. Application Note: Low-Current AC Measurement with Danisense DCCTs
  16. Application Note: A Guide to Error Analysis in Danisense DCCT Systems and Considerations for Output Selection  Ask us for Mathematica Source Code
  17. The Physics of Current Measurement – presented by Filippos Toufexis, PhD
  18. Current Measurement for Electric Vehicle Charger Test – presentation by Ben Hartzell

 

  1. Outstanding DC Gain Accuracy and Stability Demonstrated in a 100A Measuring System
    Clarke-Hess Communication Research Corp.
  2. Precision Current Monitor System for the Power Supplies at SRRC
    Yuan-Chen Chien et al, SRRC, Taiwan, Particle Accelerator Conference, 2001.
  3. Large Scale Use of Solid State AC Power Sources for Automated Transformer Testing
    Michael Orr, Pacific Power Source, Inc.; Alvin Kopp, High Voltage Test Engineering.
  4. Solid-State AC Power Sources for Transformer Testing
    Alvin Kopp, Michael Orr, Pacifica Power Source, Inc.
  1. Drawing – SP10381
  2. 3D Models, STEP files, Box.com link

Accessories

DaniSense Current Transducer (DCCT) Heads, DSSIU, Cables and Accessories are compatible with LEM IT Ultrastab Current Transducers.

The smallest power supply and interface unit from Danisense. Compatible with a wide range of current transducers.
- 1 Channel, +/-15V, 1.2 A System Interface Unit
- Universal mains input
- Banana measurement output

DSSIU-1 Transducer Interface Unit and Power Supply, single channel

DSSIU-6 Transducer Interface Unit and Power Supply, 6-channel

Fully configurable dedicated 6-channel system interface unit for Danisense DS series current transducers. Powers up to 6 x DS50 to DS2000 at the same time. Heads may be mixed (e.g. two DS2000IDLA and three DS200IDSA). Uses DB9 to DB9 cable for connection to transducer head (see cables below) and provides banana jack outputs for signal output.

Supports calibration windings and has 6 slots for optional voltage output modules VOM (1V or 10V), specified upon ordering.

Includes AC mains power cable. Other cables not included.

Additional Data:
Datasheet: DSSIU-6-1U Datasheet

DSSIU-4-1U Transducer Interface Unit and Power Supply, 4-channel

Provides Power and Signal connection for up to four Current Transducer heads. Heads may be mixed (e.g.: One DS2000ILLA and Three DS200ISSA Heads). DB9 connection to Transducer head and Banana Plug Jacks for Signal Output.
Includes AC Mains power cable. Other cables not included.
For Transducer Head to DSSIU-4-1U cable, see:
1411100001, 1411100002, 1411100003 ,1411100004 (descriptions below).

Additional Data:
Datasheet: DSSIU-4-1U Datasheet

Cables for Signal and Power, Calibration Winding Option

Signal, Power and Calibration Winding Cables
Part Number Length Termination A,
Transducer Head		 Termination B Cable Purpose
1411100001 2m DB9M DB9F Signal, Power and Calibration Winding Cable.
For use with DSSIU-4-1U or DSSIU-6-1U.
1411100002 5m DB9M DB9F Signal, Power and Calibration Winding Cable.
For use with DSSIU-4-1U or DSSIU-6-1U.
1411100003 10m DB9M DB9F Signal, Power and Calibration Winding Cable.
For use with DSSIU-4-1U or DSSIU-6-1U.
1411100005 15m DB9M DB9F Signal and Power Cable.
For use with DSSIU-4 or DSSIU-6.1
1411100004 20m DB9M DB9F Signal, Power and Calibration Winding Cable.
For use with DSSIU-4 or DSSIU-6.1
1413100002 2m DSSIU-6-1U-V:
XLRm		 Banana Plugs Current Signal Cable.
For use with DSSIU-6-1U-V.
1417100003 2m DSSIU-6-1U-V:
XLRm		 Banana Plugs Voltage Signal Cable.
For use with DSSIU-6-1U-V.
SP10381 2m DB9M Unterminated Signal and Power Cable.1
1416100001 10m DB9M DB9F Signal and Power Cable.
For use with DR5000 / DR10000 Transducer Systems
1416100002 20m DB9M DB9F Signal and Power Cable.
For use with DR5000 / DR10000 Transducer Systems
1416100007 25m DB9M DB9F Signal and Power Cable.
For use with DR5000 / DR10000 Transducer Systems
1416100003 30m DB9M DB9F Signal and Power Cable.
For use with DR5000 / DR10000 Transducer Systems

GMW-CT-BR-X.XX

The GMW-CT-BR-X.XX Burden Resistor Module generates a Voltage Monitor Signal when the current output from a closed-loop current transducer is connected to the current input terminals of a Power Analyzer or DaniSense Interface unit.

Additional Data:
Datasheet: GMW-CT-BR-X.XX Burden Resistor Module

16928-0000-0

The 16928-0000-0 Adapter Plug changes the pin-out matching from older LEM / Danfysik Current Transducers (IT 600-S and 866-600I) to newer LEM / Danfysik (IT 700-S or 867-700I) or DaniSense transducers.

Additional Data: 16928-0000-0_A_IST600S_Adaptor_Plug

V110

V110 Soft Magnetic Core, Toroidal, VITROPERM, 500F 63mm x 50mm x 25mm VAC Nanocrystalline Vitroperm Cores as Common Mode Choke

Additional Data:
VAC Brochure: VAC Nanocrystalline Vitroperm Core EMC Products
GMW Technical Presentation, Page 13, “Common Mode Choke”: Accurate Power Conversion Measurements on High Power Motor Drives

Pricing

DaniSense Current Transducer Heads, DSSIU, Cables and Accessories are compatible with LEM IT Ultrastab Current Transducers.

Compact and OEM Current Transducers

Part No.DescriptionPriceIn Stock
DT50ID

Current Transducer, 50Arms/±75A Peak, 1:500 Turns Ratio, 100mArms/±150mA Signal, DSUB Connector, Compact

 $665.00
You save (%)
DT100ID

Current Transducer, 100Arms/±150A Peak, 1:1000 Turns Ratio, 100mArms/±150mA Signal, DSUB Connector, Compact

 $678.00
You save (%)
DC200IF

Current Transducer, 200Arms/±300A DC, 1:1000 Turns Ratio, 200mArms/±300mA Signal, faston connector

 $360.00
You save (%)
Quantity Discount (%) Price
1 — $360.00
2 - 49 — $360.00
50 - 499 4.17 % $345.00
500+ 8.33 % $330.00
DP12IP

Current Transducer, 12Arms/±18A Peak, 1:250 Turns Ratio, PCB Mount

 $400.00
You save (%)
Quantity Discount (%) Price
1 — $400.00
2 - 49 — $400.00
50 - 499 7.5 % $370.00
500+ 12.5 % $350.00
DP50IP-B

Current Transducer, Programmable, 12.5/25/50Arms/±12.5/±25/±50A DC, 1:250/1:500/1:1000 Turns Ratio, PCB Mount

 $360.00
You save (%)
Quantity Discount (%) Price
1 — $360.00
2 - 49 — $360.00
50 - 499 4.17 % $345.00
500+ 8.33 % $330.00
DT200ID

Current Transducer, 200Arms/±285A Peak, 1:1000 Turns Ratio, 200mArms/±285mA Signal, DSUB Connector, Compact

 $693.00
You save (%)
DX200IH-CP01

Current Transducer, 200A DC, 1000:1 ratio, pcb and electronics, flat ribbon cable, DC-300kHz, offset 40ppm, linearity 6ppm, +/-15V

 $400.00
You save (%)
3 weeks. Quote

DSSIU-1, DSSIU-4, DSSIU-6 Interface and Power Supply Units

Part No.DescriptionPriceIn Stock
DSSIU-1

Current Transducer Interface, single-channel, DSUB to Transducer and Banana Plug Signal Connectors. Compatible with DT, DS, DQ, DN , DM, and MK series.

 $630.00
You save (%)
4 weeks. Quote
DSSIU-1-V

Current Transducer Interface, single-channel, DSUB to Transducer and BNC Signal Connectors. +/-1V or +/-10V output. Specify VOM (required). Compatible with DT, DS, DQ, DN, DM, and MK series.

 $650.00
You save (%)
4 weeks. Quote
DSSIU-4-1U

Current Transducer Interface, four-channel, DSUB to Transducer and Banana Plug Signal Connectors

 $1,630.00
You save (%)
4 weeks. Quote
DSSIU-6-1U

Current Transducer Interface, six-channel, Calibration Current Connectors, Optional VOM (voltage output module) per channel (specify upon order), DSUB to Transducer and Banana Plug Signal Connectors

 $2,080.00
You save (%)
4 weeks. Quote
DSSIU-6-1U-V

Current Transducer Interface, six-channel, Calibration Current Connectors, DSUB to Transducer and XLR Mini Current or Voltage Output (depending on Configuration). Specify VOM per channel (required).

 $2,080.00
You save (%)
8 weeks. Quote
VOM0100-1370

Voltage Output Module, 1V/100mA, 150mA max

 $350.00
You save (%)
8 weeks. Quote
VOM0100-10

Voltage Output Module, 10V/100mA, 100mA max

 $550.00
You save (%)
8 weeks. Quote
VOM0300-1

Voltage Output Module, 1V/300mA, 450mA max

 $370.00
You save (%)
8 weeks. Quote
VOM0300-10

Voltage Output Module, 1V/300mA, 300mA max

 $550.00
You save (%)
8 weeks. Quote
VOM0400-1

Voltage Output Module, 1V/400mA, 600mA max

 $370.00
You save (%)
8 weeks. Quote
VOM0400-10

Voltage Output Module, 1V/400mA, 400mA max

 $550.00
You save (%)
8 weeks. Quote
VOM0667-10

Voltage Output Module, 10V/667mA, 667A max

 $550.00
You save (%)
8 weeks. Quote
VOM0800-1

Voltage Output Module, 1V/800mA, 1.2A max

 $370.00
You save (%)
8 weeks. Quote
VOM0800-10

Voltage Output Module, 10V/800mA, 800mA max

 $550.00
You save (%)
8 weeks. Quote
VOM1333-1

Voltage Output Module, 1V/1.33A, 2A max

 $550.00
You save (%)
8 weeks. Quote
VOM1333-10

Voltage Output Module, 10V/1.33A, 1.33A max

 $740.00
You save (%)
8 weeks. Quote

Accessories

Part No.DescriptionPriceIn Stock
S102CT-5R00

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 5Ω, recommended power <0.3W

 $25.00
You save (%)
S102CT-10R0

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 10Ω, recommended power <0.3W

 $25.00
You save (%)
S102CT-20R0

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 20Ω, recommended power <0.3W

 $25.00
You save (%)
S102CT-50R0

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 50Ω, recommended power <0.3W

 $25.00
You save (%)
S102CT-100R

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 100Ω, recommended power <0.3W

 $25.00
You save (%)
S102CT-200R

Burden resistor, Metal Foil, 0.05%, 2ppm/C, 200Ω, recommended power <0.3W

 $25.00
You save (%)
HAA15-0.8-A+G

Power Supply, Open Frame, Linear, Dual, ±15V, 0.8A

 $220.00
You save (%)
HBB15-1.5-A+G

Power Supply, Open Frame, Linear, Dual, ±15V, 1.5A

 $260.00
You save (%)
HCC15-3-A+G

Power Supply, Open Frame, Linear, Dual, ±15V, 3.0A

 $320.00
You save (%)
16928-0000-0

Adapter Plug, Danfysik / LEM to DaniSense

 $200.00
You save (%)
2 weeks. Quote
GMW-CT-BR-0.83

Burden Resistor Module, .83 ohms, +/- .05%, 1500mA

 $250.00
You save (%)
2 weeks. Quote
GMW-CT-BR-1.0

Burden Resistor Module, 1.0 ohms, +/- .05%, 1200mA

 $250.00
You save (%)
2 weeks. Quote
GMW-CT-BR-1.67

Burden Resistor Module, 1.67 ohms, +/- .05%, 600mA

 $250.00
You save (%)
2 weeks. Quote
GMW-CT-BR-10.0

Burden Resistor Module, 10.0 ohms, +/- .05%, 100mA

 $250.00
You save (%)
2 weeks. Quote
GMW-CT-BR-2.5

Burden Resistor Module, 2.5 ohms, +/- .05%, 400mA

 $250.00
You save (%)
2 weeks. Quote
GMW-CT-BR-5.0

Burden Resistor Module, 5.0 ohms, +/- .05%, 250mA

 $250.00
You save (%)
2 weeks. Quote
V110

Soft Magnetic Core, Toroidal, VITROPERM, 500F 63mm x 50mm x 25mm

 $80.00
You save (%)
Backordered:
2 weeks

DC Calibration

Note: Calibration on new product is discounted 50%.

Part No.DescriptionPriceIn Stock
CL-17025-1000A-DC

17025 Accredited Calibration, Current Transducer, Full-scale Range between 0 and 1000Adc, https://gmw.com/quality/

 $500.00
You save (%)
CL-17025-1000A-DC-ADD

Calibration of Additional Transducer

 $250.00
You save (%)
CL-17025-3000A-DC

17025 Accredited Calibration, Current Transducer, Full-scale Range between 1001 and 3000Adc, https://gmw.com/quality/

 $800.00
You save (%)
CL-17025-3000A-DC-ADD

Calibration of Additional Transducer

 $400.00
You save (%)
CL-17025-11000A-DC

17025 Accredited Calibration, Current Transducer, Full-scale Range between 3001 and 11000Adc, https://gmw.com/quality/

 $1,500.00
You save (%)
CL-17025-11000A-DC-ADD

Calibration of Additional Transducer

 $750.00
You save (%)

AC Calibration

Note: Calibration on new product is discounted 50%.

Part No.DescriptionPriceIn Stock
CL-17025-1000A-AC

17025 Accredited Calibration, Current Transducer, Full-scale Range between 0 and 1000Arms, 50-400Hz, https://gmw.com/quality/

 $500.00
You save (%)
CL-17025-1000A-AC-ADD

Calibration of Additional Transducer

 $250.00
You save (%)
CL-17025-3000A-AC

17025 Accredited Calibration, Current Transducer, Full-scale Range between 1001 and 3000Arms, 50-400Hz, https://gmw.com/quality/
        400Hz is limited to 2000Arms

 $800.00
You save (%)
CL-17025-3000A-AC-ADD

Calibration of Additional Transducer

 $400.00
You save (%)
CL-17025-8000A-AC

17025 Accredited Calibration, Current Transducer, Full-scale Range between 3001 and 8000Arms, 50-400Hz, https://gmw.com/quality/
        400Hz is limited to 2000Arms

 $1,500.00
You save (%)
CL-17025-8000A-AC-ADD

Calibration of Additional Transducer

 $750.00
You save (%)

Calibration and Repair

GMW provides application and engineering and calibration support for DaniSense Current Transducers.

For Calibration and Service of DaniSense Current Transducers see Calibration & Service

Quantity Discount Schedule:
Quantity 1 – 9 10 – 24
Discount 0% 5%

For multi-channel Current Transducer Systems, see Systems Pricing.

Terms and Conditions

Terms and Conditions:

Prices not inclusive of US tariffs on products manufactured in other countries. Tariffs rates effective at time of shipment will be added.

Prices above are for domestic deliveries to Canada, USA and Mexico only.
Prices are expressed in U.S. Dollars, FCA San Carlos, California.
Prices are subject to change without notice.

Payment:

Visa, MasterCard, Amex, or Net 30 days (subject to credit acceptance).

Delivery:

From Stock to 60 Days